Jumpguard Pro Aquarium Cover

The Jumpguard Pro includes cutout and brace bar parts as standard and an aesthetic black mesh.

There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet.

Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish keepers priority list.

D-D Jumpguard covers are a very lightweight, sleek, low visual impact and easy to construct screen cover suitable for most aquarium types, specifically designed to prevent fish loss due to jumping whilst maintaining high light penetration.

75cm x 75cm

120cm x 75cm

180cm x 90cm

Kit Contents

90cm x 90cm (36" x 36") 1PC bird mesh, black material
5 x 75cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline,total length 3.5m
2 x Black finger pull
2 x Reverse corner
1 x 75cm brace bar
4 x brace clips

Kit Contents

140cm x 90cm (55" x 36") 1PC bird mesh, black material
3 x 75cm + 2 x 120cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline, total length 4.4m
2 x Black finger pull
2 x Reverse corner
2 x 75cm brace bar
6 x brace clips
2 x T corners

Kit Contents

200cm x 110cm (79" x 43") 1PC bird mesh, black material
7 x 90cm lengths of section in black extrusion profile
1 x red spline roller tool
6 x black standard corners
Black spline, total length 5.9m
2 x Black finger pull
8 x brace clips
3 x 90cm brace bar
2 x Reverse corner
2 x T corner

Jumpguard Pro Accessory - Multi-Cutout Set

Each Jumpguard Multi-Cutout Set provides you with 3 different cutout options to allow you to modify the frame around any light brackets, cables or pipework etc.

Each kit contains:
• 1 pair of 15mm offset corners
• 1 pair of 40mm offset corners
• 1 x 40mm x 120mm lighting bracket or rigid cut-out
Note:

Cutting into the standard square frame, especially on larger frames, will generally reduce the rigidity and we would recommend installing one of one or more cross braces, as required, to retain the structural integrity.

Jumpguard Pro Accessory - Flex-Cutout Set

The Jumpguard Flexi-Cutout Set provides you with 2 standard corners and 2 reverse corners to allow you to modify the frame around any larger overflow boxes, light brackets, cables or pipework etc, that would not be covered by the Multi-Cutout Set.

Each kit contains:
• 1 pair of standard corners
• 1 pair of reverse corners
Note:

Cutting into the standard square frame, especially on larger frames, will generally reduce the rigidity and we would recommend installing one of one or more cross braces, as required, to retain the structural integrity.

Jumpguard Pro Accessory - Brace Bar Set

For larger aquariums or whenever fitting a cutout set we recommend installation of one or more brace bars to retain the structural integrity of the frame and to stop the outer edges from pulling in together.

Each kit includes:
• 2 x 900mm x 12mm x 8mm brace bars
• 2 x T piece connectors
• 6 x connector clips
Note:

Brace bar extrusion and 6 clips are already supplied with the TC18990 kit as standard.

D-D Jumpguard Pro Aquarium Covers